 |
VERTICAL BENCH-TOP
MILLING MACHINE
DAVID 403
|
The Milling machine David 400
is manufacture in mechanical cast iron, have all the
constructive techniques of the big machine-tools. All the
mechanical workings are executed exclusively in our company
according to national standards and our scrupulosity.
The components used are excellent quality. The machine is very
reliable and have a centesimal precision. By request, it is
equipped by numerous fixtures chosen accurately.It can be
obtained varied mechanical workings.
|
|
Technical Characteristics: |
| |
- Construction in stabilized
engineering castings - G25
- Head can incline 90/0/90
degrees with counterweigh in the column
- Sliding safety guard with
microswitch
- Dovetail guides protected
by bellows and oil-scrapers
- Slides lubrification by
oilers
- Precision trapezoidal
screws with scrolls to game recovery
- Hand-wheels with
centesimal ninth resetable with a 0.05 resolution
- ISO 30 spindle connection
with englobed tie-rod
- quick-release of spindle
for substitution tools
- low voltage 24 v.AC
electrical system with logic
- 1,5 KW spindle motor with
vectorial inverter
- spindle rotation speed
from 100 to 3000 RPM, adjusted by potentiometer (constant
torque)
- 220V 50 Hz single-phase
power supply
- table dimensions 150x580
mm. with 3 t-slots of 10 mm
- longitudinal travel 420
mm.
- transverse travel 160 mm.
- maximum spindle nose/table
distance 300 mm.
- Z axis travel 300 mm.
- Overall dimensions without
base: 780x850x 1000h mm.
- approximate weight without
base: 150 kg.
- approximate weight with
base: 210 kg.
- lines millimetered of
reference on the three X-Y-Z axes
- This model is in
conformity with the machines directive CE 89/392.
|
Every model conforms with the EEC
directive n. 89/392.
Variations, illustrations, description, measurements and weights are not
binding
and subject to changes without notice. |
Supplementary Fixtures
